Key Points of Brake Pad Inspection and maintenance for vehicle maintenance
TIME：2020.01.17
Brake pads are consumables, in use will gradually wear, when wear to the limit position, must be replaced, otherwise it will reduce the braking effect, and even cause safety accidents. Most cars adopt the front disc rear drum brake structure, generally the front brake pad wear relatively fast, the rear brake pad use a relatively long time. In the daily inspection and maintenance should pay attention to the following aspects: 1) to replace the original factory spare parts to provide the brake pad, only in this way, can make the brake pad and brake disc between the good braking effect, wear and tear. 2) when replacing the shoes, a special tool must be used to push back the brake sub-pump. Do not press back hard with other crowbars, this can easily lead to brake caliper guide screw bending, so that the brake pad stuck. 3) after the brake shoes are replaced, it is necessary to run-in 200 km to achieve good braking effect. The newly changed shoes must be driven carefully. 4) after the replacement, be sure to step on a few feet brake, to eliminate the shoe and brake disc gap, resulting in the first foot did not brake, prone to accidents.
