Brake daily maintenance and maintenance

1. Keep the clamp disc hydraulic brake assembly, especially the brake disc and the surface of the brake liner clean, so that the whole brake freely, flexible and reliable, clean and clean.

2. Frequently observe the stock of brake fluid in the oil tank. When the liquid level is lower than the mark line, the original brand clean brake fluid should be added in time to make its height higher than the mark line millimeter. It is not allowed to mix other brands of brake fluid. After adding, it should be opened to exhaust and then use tightly.

3. Check the thickness of the brake disc regularly (usually over km). When the thickness of the brake disc after wear is less than the specified value, the brake disc must be replaced.

4. In use, the surface of the brake lining is not allowed to be stained with grease or brake fluid, and check the thickness of the lining regularly. When the thickness is less than the specified value, the lining should be replaced.

5. When oil leaks from the piston of main pump and sub-pump, the sealing ring must be replaced. Special attention should be paid to the new sealing ring must be soaked in the brake fluid for more than hours before replacing, can not be taken out for assembly use. When cleaning the cylinder or piston, sprinkle solution must be used. Gasoline or other mineral oil is not allowed.